Installation Instructions

Ceiling Lamps and Hanging Lamps

CAUTION

  • For your safety, turn off the power to the circuit at the main fuse box before installation.
  • We highly recommend that a professional electrician install all direct wire fixtures.
  • It is advised that two people install the lamp: one to install electrical wiring and one for lamp support.

ASSEMBLY

  1. Carefully remove the lamp from its packaging.
  2. Unscrew the mounting plate from the lamp base. Keep the screws in a safe place.
  3. Place the mounting plate to the holes in the ceiling outlet and secure with the screws.
  4. Connect the wires with the corresponding colors and secure with electrical tape or wire nuts.
  5. Place the lamp base to the mounting plate with the screws.
  6. Insert the bulb into socket.
  7. Test the lamp.

 

Wall Lamps

CAUTION

  • For your safety, turn off the power to the circuit at the main fuse box before installation.
  • We highly recommend that a professional electrician install all direct wire fixtures.
  • It is advised that two people install the lamp: one to install electricals and one for lamp support.

ASSEMBLY

  1. Carefully remove the lamp from its packaging.
  2. Unscrew the mounting plate from the lamp base. Keep the screws in a safe place.
  3. Place the mounting plate to the holes in the wall outlet and secure with the screws.
  4. Connect the wires with the corresponding colors and secure with electrical tape or wire nuts.
  5. Place the lamp base to the mounting plate with the screws.
  6. Insert the bulb into socket.
  7. Test the lamp.

 

Gate Lamps

CAUTION

  • For your safety, turn off the power to the circuit at the main fuse box before installation.
  • Make sure that the lamp is installed while all surfaces are dry to avoid accidents.
  • We highly recommend that a professional electrician install all direct wire fixtures.
  • It is advised that two people install the lamp: one to install electricals and one for lamp support.

ASSEMBLY

  1. Carefully remove the lamp from its packaging.
  2. Unscrew the mounting plate from the lamp base. Keep the screws in a safe place.
  3. Place the mounting plate to the holes in the ceiling outlet and secure with the screws.
  4. Connect the wires with the corresponding colors and secure with electrical tape or wire nuts.
  5. Place the lamp base to the mounting plate with the screws.
  6. Insert the bulb into socket.
  7. Test the lamp.

 

Table Lamps and Floor Lamps

CAUTION

  • The lamp is hardwired and requires no assembly. Do not remove the lamp from its packaging by pulling on the power cord, as a bad connection may result.
  • To reduce the risk of fire, electrical shock, or personal injury, always turn off and unplug lamp and allow it to cool prior to replacing light bulb. Keep flammable materials away from lit bulb.
  • Keep wirings in a place with low traffic area to avoid pulling and tugging.

ASSEMBLY

  1. Carefully remove the lamp from its packaging.
  2. Make sure that the shade and the light bulb is secure.
  3. Plug into proper electrical outlet and test the lamp.