Square Clutch
✓ Lead time subject to change upon request depending on your requirements.
✓ We accept customizations and repairs
✓ Credit card accepted, we ship nationwide
Square Clutch Hanging Lamp is a cube-shaped lamp made of frosted white acrylic. Cross steel rod accents support its bottom while giving it a modern touch.
Type: Hanging Lamp
Dimension:
- inch: 13"L x 13"W x 16"H
- mm: 330mml x 330mmW x 406mmH
Socket & Bulb: 2pcs E27 Socket, A60 Bulb
Material and Finish:
- Acrylic diffuser in frosted white finish
- Stainless steel accents in mirror silver finish
For all orders, please be advised that there is a lead time for production, approximately 3 weeks to 1 month. The delivery date may change depending on the quantity of your order. Our sales consultants will be in touch with you every step of the way.
FAQs
Does the lighting fixture come with a lightbulb?
Yes, this comes with a complementary light bulb. However, they are not replaceable. Bulbs can be purchased here.
Do I have to assemble the lamp?
No, it comes hardwired and ready to install.
Where do you ship?
We currently ship all around the Philippines
How soon will I receive my lamp?
Please be advised that our lamps are made to order. Our production lead time is around 3 weeks to 1 month, depending on the extent of customization and quantity of your orders. Rest assured, our sales representative will e-mail you updates on your order.
Installation Instructions
Ceiling Lamps and Hanging Lamps
CAUTION
- For your safety, turn off the power to the circuit at the main fuse box before installation.
- We highly recommend that a professional electrician install all direct wire fixtures.
- It is advised that two people install the lamp: one to install electrical wiring and one for lamp support.
ASSEMBLY
1. Carefully remove the lamp from its packaging.
2. Unscrew the mounting plate from the lamp base. Keep the screws in a safe place.
3. Place the mounting plate to the holes in the ceiling outlet and secure with the screws.
4. Connect the wires with the corresponding colors and secure with electrical tape or wire nuts.
5. Place the lamp base to the mounting plate with the screws.
6. Insert the bulb into socket.
7. Test the lamp.
Wall Lamps
CAUTION
- For your safety, turn off the power to the circuit at the main fuse box before installation.
- We highly recommend that a professional electrician install all direct wire fixtures.
- It is advised that two people install the lamp: one to install electricals and one for lamp support.
ASSEMBLY
1. Carefully remove the lamp from its packaging.
2. Unscrew the mounting plate from the lamp base. Keep the screws in a safe place.
3. Place the mounting plate to the holes in the wall outlet and secure with the screws.
4. Connect the wires with the corresponding colors and secure with electrical tape or wire nuts.
5. Place the lamp base to the mounting plate with the screws.
6. Insert the bulb into socket.
7. Test the lamp.
Gate Lamps
CAUTION
- For your safety, turn off the power to the circuit at the main fuse box before installation.
- Make sure that the lamp is installed while all surfaces are dry to avoid accidents.
- We highly recommend that a professional electrician install all direct wire fixtures.
- It is advised that two people install the lamp: one to install electricals and one for lamp support.
ASSEMBLY
1. Carefully remove the lamp from its packaging.
2. Unscrew the mounting plate from the lamp base. Keep the screws in a safe place.
3. Place the mounting plate to the holes in the ceiling outlet and secure with the screws.
4. Connect the wires with the corresponding colors and secure with electrical tape or wire nuts.
5. Place the lamp base to the mounting plate with the screws.
6. Insert the bulb into socket.
7. Test the lamp.
Table Lamps and Floor Lamps
CAUTION
- The lamp is hardwired and requires no assembly. Do not remove the lamp from its packaging by pulling on the power cord, as a bad connection may result.
- To reduce the risk of fire, electrical shock, or personal injury, always turn off and unplug lamp and allow it to cool prior to replacing light bulb. Keep flammable materials away from lit bulb.
- Keep wirings in a place with low traffic area to avoid pulling and tugging.
ASSEMBLY
1. Carefully remove the lamp from its packaging.
2. Make sure that the shade and the light bulb is secure.
3. Plug into proper electrical outlet and test the lamp.
Care Instructions
For Shade:
To remove dust or fingerprints, wipe gently with a soft, clean cloth. In case of any stubborn stains, we offer shade replacement services.
For Body:
Clean with a soft damp cloth. Avoid the use of harsh chemicals and household cleaners as they may damage the finish.
For Diffuser:
Unscrew or slightly lift the diffuser to remove it from the lamp. Wipe the diffuser with a soft damp cloth and return it to the base of the lamp once cleaned.